About This Item

Pro-Select / Defiant Floor Wax / BSS2040 / 1 gal / case or individually

Defiant Floor Finish is a synthetic blend of high gloss polymers, leveling agents and drying solvents. This product, contains a new generation polymer that is chemically programmed to keep the finish shining brighter and wearing longer. It prevents scratching and gives the floor an exceptionally long wear life. Defiant Floor Finish sets a completely new standard for floor finishes. It can be used on all resilient floors- vinyl asbestos, asphalt tile, vinyl sheet and tile, rubber, reinforced vinyl, and linoleum.  4 Gal / Cs

DIRECTIONS
1. Clear the area to be finished of all movable objects.

2. Sweep the floor clean of loose dirt and debris.

3. Apply stripper and remove all old wax and floor finish.
Repeat if necessary.

4. Rinse the floor as thoroughly as possible and let dry.

5. Work with clean equipment and mop on a thin coat of finish. Allow to dry
thoroughly (at least 30-45 minutes) before applying another coat.

6. A minimum base of 4 - 5 coats is required before burnishing.
Sweep daily with a dust mop or cloth. Clean with a neutral pH cleaner with
a mop bucket or automatic scrubber.

Light cleaning will remove surface soils and stains and maintain gloss and
color. Dry buff or burnish after cleaning to obtain a wet look. Heavy traffic
lanes should be treated with a spray buff or restorer.

PAD SUGGESTIONS: Natural fiber pads are preferred for burnishing. A tan,
beige, or light blue synthetic pad can also be used.